Difference between revisions of "Status Chris Wolstenholme Signature Bass"
Crazybobbles (talk | contribs) m (Crazybobbles moved page Chris' signature bass to Status Chris Wolstenholme Signature Bass) |
|
(No difference)
| |
Revision as of 12:31, 25 September 2012
| Chris Wolstenholme signature Bass | |
|---|---|
| Manufacturer | Status Graphite |
| Used | 2011-05-20- |
| Body type | Alder encased in one-piece graphite composite |
| Neck joint | Neck-through |
| Body covering | High gloss lacquer |
| Wood | Alder body, wrapped in a carbon-graphite shell |
| Bridge | Mono-rail bridge units |
| Electronics | Master volume and pickup blend controls |
| Pickup(s) | 2 Status hum-cancelling pickups |
| Special circuits | Treble and bass active E.Q. plus bright switch, control orientation reversed, midrange boost circuit. |
From the Status Graphite website:
Chris originally bought his first headless Series 2 from a friend because he was so impressed with the tone. This first model was made in the early 80's.
In the last few years he has used a wide selection of Status basses both live and in the studio. These include a couple of headed S2-Classics, a GP-Artist and a KingBass Mk-II.
In the last few months we have developed a new Signature model which retains most of the classic Status features but has been tailored to Chris' personal playing style.
1 : The bridge pickups has been moved away from the bridge by 20mm to make the right-hand technique a little more flexible.
2 : The neck pickup has also been moved towards the fingerboard by 10mm which makes the tone a little warmer.
3 : Volume / pickup balance and bass / treble controls have been reversed when compared to a standard Status bass. This has no effect on the way the controls operate, it's just a personal preference Chris has.
4 : A new midrange control has been fitted : this has individual controls for both mid frequency and mid cut / boost. This allows you to pin-point the exact midrange frequency then adjust exactly how much is to be boosted or cut. This midrange control can be pre-set and there is an on/off switch to by-pass it completely.
5 : Chris also specified front LEDs as a custom option. His main bass currently has blue LEDs (red, green, amber and white are also available)
6 : Black hardware is standard on Chris' basses (gold and chrome are also available)
7 : Individual mono-rail bridge units are fitted as standard.