Difference between revisions of "Matchless"
Peterwagner (talk | contribs) |
m (s/Image/File; s/On/In; Backto template; move from Amplifier cat to Amplifiers cat; rm from Gear cat) |
||
| Line 1: | Line 1: | ||
[[ | [[File:Pd soldanoadjust.jpg|thumb|right]] | ||
In the picture you can see the Matchless DC30 at the bottom left. | |||
The preamp sections are based on a layout of two 12AX7's in Channel 1 and one EF86 in Channel 2. The twot 12AX7's in Channel 1 create a parallel-triode circuit with interactive bass and treble. The one EF86 in Channel 2 consists of a high-gain pentode coupled to a six-position tone switch. Outright benefits include quick dial-in of new tones and an easy return to the settings you learn to prefer. Also ''high treble'' cut control, master volume, with a bypass feature that offers flexible control of the power amp section. The power amp is fed by a 12AX7 phase inverter, which drives four EL84 power tubes. The rectifier circuit gives you the flexibility of using one 5AR4 for a quick attack or you can use two 5V4's for a smooth round response. Other professional features include an effects loop, half power-mode switch (a conservative 30 watts switching to 15 watts), output impedance selector (4, 8, 16 ohms) and a speaker phase-reverse switch. | The preamp sections are based on a layout of two 12AX7's in Channel 1 and one EF86 in Channel 2. The twot 12AX7's in Channel 1 create a parallel-triode circuit with interactive bass and treble. The one EF86 in Channel 2 consists of a high-gain pentode coupled to a six-position tone switch. Outright benefits include quick dial-in of new tones and an easy return to the settings you learn to prefer. Also ''high treble'' cut control, master volume, with a bypass feature that offers flexible control of the power amp section. The power amp is fed by a 12AX7 phase inverter, which drives four EL84 power tubes. The rectifier circuit gives you the flexibility of using one 5AR4 for a quick attack or you can use two 5V4's for a smooth round response. Other professional features include an effects loop, half power-mode switch (a conservative 30 watts switching to 15 watts), output impedance selector (4, 8, 16 ohms) and a speaker phase-reverse switch. | ||
[[Category: | {{Backto | amplifiers}} | ||
[[Category:Amplifiers]] | |||
Revision as of 23:20, 16 August 2009
In the picture you can see the Matchless DC30 at the bottom left.
The preamp sections are based on a layout of two 12AX7's in Channel 1 and one EF86 in Channel 2. The twot 12AX7's in Channel 1 create a parallel-triode circuit with interactive bass and treble. The one EF86 in Channel 2 consists of a high-gain pentode coupled to a six-position tone switch. Outright benefits include quick dial-in of new tones and an easy return to the settings you learn to prefer. Also high treble cut control, master volume, with a bypass feature that offers flexible control of the power amp section. The power amp is fed by a 12AX7 phase inverter, which drives four EL84 power tubes. The rectifier circuit gives you the flexibility of using one 5AR4 for a quick attack or you can use two 5V4's for a smooth round response. Other professional features include an effects loop, half power-mode switch (a conservative 30 watts switching to 15 watts), output impedance selector (4, 8, 16 ohms) and a speaker phase-reverse switch.